Industrial Visit to NTPC at DADRI
IEC Group of institution organised an industrial visit to NTPC(National Thermal power Corporation)at Dadri Greater Noida, Utter Pradesh on 23rd April,2019. Twenty five students of EE/EC branch had visited NTPC. NTPC provides many job opportunities and internship program for engineering students.
NTPC is a power project to meet the power demand of national capital region (India). NTPC has huge coal fired thermal power plant, a gasfired plant and green and clean energy solar plant. Capacity of these plant are 1820 MW, 830 MW And 5 MW respectively.
Thermal power plant
First of all we have visited the thermal power plant. First unit of thermal power plant is installed in October 1991. Capacity of this unit is 210 MW. And further 1992, 1993 and 1994 installed three different unit of thermal power plant each unit capacity is 210 MW. In order to meet the growing electricity demand, two unit is installed in 2010, a unit with capacity is 490 MW. Total capacity of thermal power plant is 1820 MW.
In this plant coal is used as fuel source to increase the temperature of water, which is converted into high pressure steam. High pressure steam is projected on turbine blades to rotate the turbine. Shaft of the turbine and generator are mechanically connected to each other. The connected synchronous generator hence generates AC voltage.
Temperature of super heated steam is maintained around 500 °C. To convert the residual steam into water, cooling towers were used.
Gas power plant
LPG and air is used as a fuel in the gas power plant. Using combustion process, mixture of air and gas passes in the turbine, which rotate the generator connected to its shaft. Further, the energy of exhaust gases is reused to generated steam. This steam is used in steam turbine to generate additional electricity. The combined cycle plant is normally designed to meet base and intermediate load.
Gas power plant is used to supply electricity to peak load. The first unit of gas power plant is installed in March 1992. Capacity of this unit is 130 MW. At present time total 6 units are working. 4 units of 130 MW and 2 unit of 154 MW comprising of total capacity 830 MW.
Solar power plant
Solar power plant is a source of green and clean energy. Solar panel consists of photo-voltaic cell. Photo-voltaic cell directly converts solar energy into electricity. They work on the principle of photovoltaic effect. The solar panel generates DC voltage. DC voltage is then converted into AC voltage using multi-level-inverter. Step-up transformer further increase voltage to transmit.
Solar power plant was started in 2013 there. It generate 5 MW power covering an area of 27 acer.
Automatic robots were also employed to clean dust of solar panel on regular basis.
Industrial Visit to Surya Food Agro Ltd. (Priyagold Biscuits) at Gr. Noida on 27th February 2019.
Established Surya Food & Agro Ltd. in the year 1994 under umbrella brand Priyagold. With several years of experience and expertise in the industry, baking runs deep in their genes. With time, the family kept joining hands with new people who have become today's valued customers. The family's aspiration to provide good quality to masses is reflected on it's brand's slogan "Haq Se Maango" which means that everybody is entitled to get good quality product at right prices. This policy of the company has driven the company to achieve such heights and develop base as strong as Priyagold's.
Millions of Indians have grown up eating Priyagold Biscuits over the past years. Priyagold has now become synonymous with India's favorite biscuits. With the love from our customers, we have experienced a meteoric rise to the top of the food sector globally by expanding to cookies, cakes, confectionaries and juices/beverages. Our products are now available in more than 20 countries. Priyagold produces scrumptious premium biscuits and has done so for the past 23 years. The popularity of brands like Butter Bite, CNC, Snacks Zig Zag & Marie Lite have enabled us to command a sizeable market share in the biscuit industry
Industrial Visit to Oerlikon Graziano Transmissioni India Pvt. Ltd at Gr. Noida on 6th February 2019.
About Oerlikon Graziano
Oerlikon Graziano is worldwide leader in the field of "Components for Power Transmission"
The experience gained during eighty years of production, the high degree of personnel loyalty and ongoing research and development have given to Oerlikon Graziano a great heritage in know-how and reliability. More than 80 years on the market in power transmission, Oerlikon Graziano is focused on the following key markets: Automotive, Off-highway, Industrial.
Oerlikon Graziano is a dynamic, flexible and evolved company, all this thanks to the use of advanced systems of design and calculation (2D and 3d systems) which allow the innovation, conception and development of new products.
Worldwide leader in gearing and shifting solutions
Oerlikon Graziano is the world's largest and global manufacturer of custom gears and shafts, especially for agricultural, off-highway, industrial and power generator markets and is the world leader in the design, development and manufacture of synchronisers and hydraulic clutches used within the Agricultural and Off-Highway vehicle industry.
Drive Systems India - Greater Noida plant
The plant is located in Greater Noida on 15 acres of land (60,000 sqm) having 32,860 sqm covered area with fully capitalized power (6875 KVA PLC controlled generators) and is specialized in production of gears, shafts, synchronizer assemblies, crown wheel & pinion for AG tractors, construction equipment, commercial vehicles and other off-highway applications.
The facility is equipped with advanced technologies for crown wheel & pinions (Gleason face milling and Face Hobbing) and Electron Beam Welding (EBW) technology, and it has state of the art heat treatment capabilities and fully robotic Continuous Type Gas Carburising Furnace (CGCF).
Industrial Visit to India International Convention & Expo Centre (IICC). Project site of Larsen & Toubro Ltd at Dwarka, Delhi on 8th March 2019
IEC Group of Institutions organized an Industrial Visit for its Civil Engineering – 4th Year students to India International Convention & Expo Centre (IICC) Dwarka on 8th March 2019. Its project site of Larsen & Toubro Ltd.
At a Glance : India International Convention & Expo Centre (IICC)
Prime Minister Narendra Modi will lay the foundation stone of the state-of-the-art convention centre in Dwarka on the lines of the ones in Shanghai, Hong Kong and Singapore for hosting exhibitions, trade fairs and summits of international standards.
India International Convention & Expo Centre (IICC) is a flagship project of Government of India with a vision to create a state-of-the-art, world class Exhibition and Convention Facility which will be on par with the best in the industry worldwide, in size and quality; offering an efficient and quality setting for international as well as national meetings, conferences, exhibitions and trade shows.
At an estimated cost of INR 25703 crore, the project is being developed in Sector-25, Dwarka and is envisioned to be on a scale of a Central Business District (CBD) with about 3,03,000 Sq.m. of Exhibition space, 60,000 Sq.m. of convention area, 50,000 sq.m of Multipurpose Arena along with a supporting development of retail, commercial & office spaces, hospitality, and entertainment and lifestyle opportunities for end-users. The facility will be first of its kind in the country with Exhibition Halls having large column free spaces and ability to host large scale defense and aerospace exhibits.
The Convention Centre complex will have an ability to hold 10000 delegates with a world class plenary hall of capacity to hold 6000 pax. Further, a Multipurpose Arena, with flexible space and retractable roofing system to hold sports events, trade & fashion shows, and national events, will have a capacity of 20000 pax.
Industrial Visit to Coca-Cola Happiness Factory M/s Moon Beverages Ltd. (Coca-Cola plant) at Greater Noida on 25th March 2019
IEC Group of Institutions organized an Industrial Visit for its B.Tech. EE, EC 3rd year, MBA Final year & Hotel Management students to Coca-Cola Happiness Factory M/s Moon Beverages Ltd. (Coca-Cola plant) at Greater Noida on 25th March 2019
At a Glance : Coca-Cola Happiness Factory M/s Moon Beverages Ltd.
At Coca-Cola Happiness Factory (Museum) Greater Noida, experience the history of the world's most famous beverage brand at the dynamic, multimedia home of the more than 130-year-old secret formula for Coca-Cola. Get closer than ever before to the Coca-Cola Vault, view never-before-displayed artifacts and get an inside look at the bottling process. Take a trip around the world of Coca-Cola movie experience and tempt your taste buds with beverages in our Taste It! beverage bar
Moon Beverages started with manufacturing of soft drinks THUMS UP, LIMCA, MAAZA, RIMZHIM, BISLERI, SODA GOLD SPOT under arrangement with Parle. However in 1994 the company became the authorized bottler of Coca Cola Atlanta, USA and started manufacturing and distribution of Coca Cola, Limca, Sprit, Maaza, Thums UP, Fanta, Minute Maid, Coke Zero & Kinley. Moon Beverages Limited, Largest Bottling Operation Company (FBO) of The Coca Cola Company in India & existing beverage business since 25 years, We are Manufacturing the Coke Product and selling in Delhi NCR Market. Moon has the sole right of Manufacturing/Market of Kinley Packaged Drinking Water in Delhi & NCR.
Industrial Visit to Yakult Danone India Pvt Ltd on 14th November 2018
As a part of its endeavour to help the students gain latest first hand information regarding functioning of the Industry and engaging them in active learning experiences outside the classroom, IEC Group of Institutions organized an Industrial Visit for its Hotel Management – 2nd, 3rd , 4th Year students to Yakult Danone India (P) Ltd on 14th November 2018.
Yakult Danone India (P) Ltd is a 50:50 Joint Venture between Yakult Honsha, Japan and Group Danone, France, both of whom are global leaders in Probiotics. In India, Yakult is manufactured at an ISO 9001:2008, HACCP and OHSAS 18001:2007 certified manufacturing facility in Industrial township of Sonepat, Haryana.
The visit started with a presentation by the company personnel in form of a brief introduction about the origin of probiotics, brief about the Company, its distribution network in India and current position on the global platform.
Students were taken for a factory visit and every step in the process of manufacturing of the probiotic health drink, Yakult, starting with germination of the Lactobacillus Casei strain Shirota (LcS) bacteria, enlarging it to the desired production levels, role of Quality Control department, packing of the final product were explained to the students. All the queries of students were answered by the company guides.
Students participated with enough zeal to make the visit pretty much interactive, meanwhile gaining decent knowledge about Production, Quality Control, Marketing and Operations regarding functioning of the Company.
Industrial Visit @ Anmol Bakers Pvt. Ltd., Greater Noida | 17th & 22nd November, 2018
The students of Electrical Engg 2nd , 3rd & 4th year were taken to visit the industrial visit on 17th & Hotel Management 2nd , 3rd & 4th year students on 22nd November 2016 to Anmol Biscuits Limited, Greater Noida. The students got an opportunity to get a corporate exposure by the means of industrial visit. Such visits make the young and budding managers broaden their understanding with respect of corporate functioning.
Since 1994, Anmol Industries Limited is a leading player in the Indian FMCG industry with an annual turnover in excess of Rs 1000 cr. We have a strong presence across the Northern and Eastern India. "Anmol" as our flagship brand, we are a branded, packaged food company, majorly focusing on biscuits, cakes and cookies. We are the fourth largest biscuit brand and the fifth largest cake brand in India in terms of revenue. In the Eastern parts of India, we rank third across the biscuits segment and fourth across the cakes segment in terms of revenue
Industrial Visit to Honda Car India Ltd on 28th September 2018
IEC Group of Institutions organised an Industrial Visit for its Mechanical Engineering – 3rd Year students to Honda Car India Ltd on 28th September 2018. Moving forward with grit and relentless determination, Soichiro Honda established Honda Motor Co. Ltd, on September 24, 1948, in Itaya-cho, Honda CIL specialized in Automobile, located at Greater Noida, U.P
As soon as we reach at HONDA CIL, everyone greeted us in a friendly manner. Sr. Manager HR, gave up a gist of what would happen during the visit. We came to know that we had introduction sessions, Production plant visit and FAQ, each giving a detailed view of various aspects of a Automobile industry.
After the industry visit, Everyone was motivated and a bright smile could be seen at everyone's face. The time passed by talking to each other. Everyone was happy after such a wonderful experience
Industrial Visit to Global Autotech Ltd. on 26th October 2018
IEC Group of Institutions organized an Industrial Visit for its Mechanical Engineering – 2nd & 3rd Year students to Global Autotech Ltd. on 26th October 2018.
Global Autotech Ltd has been a pioneer in India in many cutting edge technologies for precision automotive components.
Global Autotech Ltd has been making high precision machined and tubular parts for automotive Air Conditioners and its parts are being used in prominent passenger cars manufactured in India.
Global Autotech Ltd is also the only facility in South Asia to have a vertical squeeze casting machine which is suitable for very high integrity castings used in structural and high pressure applications. These castings are used for engine mountings and high pressure applications.
Global Autotech Ltd is also the pioneer in India manufacturing high precision compressor parts like piston and swash plates. These parts are machined on fully automatic lines with automated gauging and in house capability for special process like Teflon resin coating and Tin coating.
Industrial Visit to Satellite Earth Station (BSNL) on 29th October 2018
IEC Group of Institutions organized an Industrial Visit for its Electronics & Communication Engineering, Information Technology – 2nd & 3rd Year students to Satellite Earth Station (BSNL), Network Operation & Control Center (NOCC), Department of Telecommunications on 29th October 2018,
Network Operations Control Center (NOCC) under Department of Telecommunication created to control the transmissions form ground segment (satellite earth stations) along with the Master control Facility under Department of Space to manage the operation of Satellites (INSAT) in orbit. At the time of operationalisation of INSAT 1 A the NOCC functions were carried out by using the Sikandrabad Communications Earth Station Antenna and working form one of the ports of the RF power divider
A separate NOCC earth station was made available in the first half of 1983 when the limited domestic SATCOM network was working through two leased INTELSAT transponders.
Industrial Visit to DENSO India Pvt. Ltd.on 8th October 2018
IEC college organized an industrial visit to DENSO India Ltd., Gr. Noida on 08th October,2018 for its students of EE 2nd yr, EE 3rd yr and ME 3rd yr. Our institution believes in broadening the horizons of the students.
DENSO is a leading supplier of advanced automotive technology, systems and components for major automakers. We are committed to making the world a better place through our world-first products and technologies. DENSO started it's operation in India more than 30 years back in 1986, with the aim to venture into a budding Indian automobile market. India is presently one of the largest and fastest growing markets in the world owing to an increasing middle class and a young population.
The students got an opportunity to understand the functioning of this company and they appreciated the work ethics being practiced by the company.
Industrial Visit to Control & Switchgear Ltd., Greater Noida.on 26th October 2018
IEC Group of Institutions organized Industrial Visit to Control & Switchgear Ltd, Greater Noida for the Electrical Engineering 2nd & 3rd year students. This visit aimed to update the students about the various channels of production and distribution in the company. The students were shown a company presentation.
The students were enthusiastic about this visit and were enriched on the ways the company functions and understood on ground about the as to how synergy between various departments take place. They were made aware about the innovations that are taking place in the company.
C&S Electric was founded in 1966, with a dream to be a company which plays a vital role in the development of the power infrastructure of India and makes the "Made in India" label respected the world over. Owing to the expertise in the domain for over 50 years, our largest served markets include industries, infrastructure, power generation, transmission & distribution, etc. A sizeable portion of our production is exported to countries like USA, Europe, Russia, Brazil, Malaysia, Middle East and Australia.
Industrial Visit to M/s Everrise Poly Pro., Greater Noida.on 26th September 2018
IEC Group of Institutions had organized an industrial visit to Everrise Poly Pro., Greater Noida on 26th September 2018. The students of Electrical Engineering 3rd year had been taken to the industrial excursion. The students attended the company presentation and they were made to see the different parts of the plant. The students understood the working of different departments of the company.The students were really enlightened about the functionality of an international company and they found this trip very interesting.
An ISO 9001:2015,company, With the vision to be leader in Plastic Moulds, Plastic moulded parts & Assemblies by maintaining highest levels of productivity, quality and customers satisfaction with domestic and overseas work culture .Strategically. EPP is recognized in the industry as a manufacturer of reputed companies and has carved a niche in the field of Electrical and Lighting, Automotive, Telecom, White Goods- Home Appliances, Office Automation industries with specialization in insert molding.
Industrial Visit to Mother Dairy Fruit & Vegetable Pvt. Ltd. on 15th November 2018
IEC Group of Institutions has been organizing Industrial Excursions for the up gradation of the students. The institute believes in the giving the best corporate exposure to the students by means of first hand information. On 15th November, 2018 our IEC Hotel Management 2nd, 3rd year students visited Mother Dairy Fruit & Vegetable Pvt Ltd at Patparganj, Delhi.